Fan lights are found on top of a long door frame. They are normally made of glass with a vent of one inch over the glass. They permit light and air development all through a room. They are regularly fitted on door methods of all rooms with the exception of wash rooms and restrooms. In rooms where the hall has no sufficient light, they help by permitting it into the entry. This light is from windows in the rooms. The glass is fixed into a refund utilizing wood beadings nailed to the door frame.
The fan light can be of made of clear sheet or pearly glass. This will rely upon the measure of light proposed on the entry and the door area. The vent over the glass can be covered with a cloth wire. This will prevent the creepy crawlies and flies from intersection from the open anterooms into the rooms. The fan light can be presented on door frame existing in a house. Where door frame statures are more prominent than ten feet, a fan light can be utilized. This will likewise give great door frame feel.
The fixing of the glass fan light beginnings with estimating the size of the opening over the door frame, the glass is then cut, leaving a one inch hole at the top. The glass ought to be cut leaving space at the base and side of the frame. This will permit it to slide into the discount of the frame without stalling out. The beading’s to be utilized ought to likewise be estimated and cut at 45 degrees at the finishes. This will permit a smooth joint at the corners. The wire nails to be utilized ought not to break the beading when being pounded in.
At the point when the glass is slid into the refund, board pins are pounded into three spots round. This are for guaranteeing the glass does not shake when the door is shut. Likewise on account of wind spouting into the room windows are opened. The beading is then pounded onto the refund additionally utilizing the board pins. The beading should fit flush with the discount. After it is fixed, painting of this wood is then completed. This should coordinate with the door frame paint. After apply three coats and it dries, the glass is cleaned to eliminate any paint marks.